This page describes the ViewStation's Serial Port 2
Connector.
The serial port 2 connector is an RS-423/RS-232
DB25 male connector with the following configuration:
PIN --
SIGNAL
1 -- Chassis Ground
2 -- Transmit Data (output)
3
-- Receive Data (input)
4 -- Request To Send (output)
5 -- Clear To Send (input)
6 -- Not Used
7 --
Signal Ground
8 -- Not Used
20 -- Data Terminal Ready
(output)
All other pins are not used.
Shell -- Protective
Ground
Baud rates from 110 to 57.6 Kbaud are supported.
Return to Section Heading Page
Return to the Home Page
If you need more information than is available here, you can reach
HDS via email at info@hds.com, or
call us at 1.800.HDS.1551 in the USA, or at +610.277.8300 from outside
the US. For questions or problems regarding the HDS WWW page, contact
webmaster@hds.com.
© 1996 by HDS Network Systems
Inc.