This page lists the Configuration File. It changes with each HDSware
release, so check the HDSware for the version currently in use. This
file is listed in /HDSware/hds-fx/config/config.syntax.fx.
Note: if there is no value entered for a resource, or the value
entered is prohibited (out of range or wrong type), the default value
will be used.
Note: there must be no white space
after the resource entry.This file shows the syntax for
the ViewStation's configuration files. An example of an actual
configuration file is given in config.syntax.fx.
Note that [
YES | NO ] denotes a choice which must be specified as either YES or NO
if this resource name is given. Do NOT write the enclosing
square_brackets [ and ] or the vertical_bar |. The entry DOMAIN_NAME
must be either a numeric IP_ADDRESS nnn.nnn.nnn.nnn or an alphanumeric
NAME which can be resolved by a domain name server. Field Name Value and
Default Assignment HDSsetup.ipaddress: nnn.nnn.nnn.nnn
HDSsetup.ipaddress.resolve: [ BOOTP | RARP | SETUP ]
HDSsetup.ethertype: [ THIN | THICK ]
HDSsetup.network.netmask: nnn.nnn.nnn.nnn
HDSsetup.network.gateway: nnn.nnn.nnn.nnn
HDSsetup.network.broadcast: nnn.nnn.nnn.nnn
HDSsetup.network.timeout: [ 5 to 120 ] (default = 15 seconds)
HDSsetup.pcmcia.internal.tr.ipaddress: nnn.nnn.nnn.nnn
HDSsetup.pcmcia.internal.tr.netmask: nnn.nnn.nnn.nnn
HDSsetup.pcmcia.internal.tr.mtu: [ 516 | 1500 | 2052 | 4472 | 8144
| 11407 | 17800 ] (default = 2052)
HDSsetup.pcmcia.external.tr.ipaddress: nnn.nnn.nnn.nnn
HDSsetup.pcmcia.external.tr.netmask: nnn.nnn.nnn.nnn
HDSsetup.pcmcia.external.tr.mtu: [ 516 | 1500 | 2052 | 4472 |
8144 | 11407 | 17800 ] (default = 2052)
HDSsetup.boot.download: [ NETWORK | ROM ]
HDSsetup.boot.bootp.protocol: [ TFTP | FTP | NFS ]
HDSsetup.boot.bootp.username:
HDSsetup.boot.bootp.password: <encrypted value when BOOTP
password given>
HDSsetup.boot.bootp.account:
HDSsetup.ServerCode.file:
HDSsetup.config.file: (default
= /FXUtilities/hds-fx/config/ config.fx)
HDSsetup.syslog.config.file:
HDSsetup.rhosts.file:
HDSsetup.serial1.ipaddress:
nnn.nnn.nnn.nnn
HDSsetup.serial1.add.network.route: [ NO | YES ]
HDSsetup.serial1.set.default.gateway: [ NO | YES ]
HDSsetup.HDSsetup.remote.serial1.host:
DOMAIN_NAME
HDSsetup.remote.serial1.netmask: nnn.nnn.nnn.nnn
HDSsetup.serial2.ipaddress: nnn.nnn.nnn.nnn
HDSsetup.serial2.add.network.route: [ NO | YES ]
HDSsetup.serial2.set.default.gateway: [ NO | YES ]
HDSsetup.remote.serial2.host:
DOMAIN_NAME
HDSsetup.remote.serial2.netmask: nnn.nnn.nnn.nnn
HDSsetup.ppp.serial1.messagelevel: [ LOW | MEDIUM | HIGH ]
HDSsetup.ppp.serial1.headercomp: [ ENABLED | DISABLED ]
HDSsetup.ppp.serial1.protocomp: [ ENABLED | DISABLED ]
HDSsetup.ppp.serial1.linkmonitor: [ ENABLED | DISABLED ]
HDSsetup.ppp.serial1.linkmonitor.interval: [ 5 to 300 ] (default =
10)
HDSsetup.ppp.serial1.addressnegotiation: [ ENABLED | DISABLED ]
HDSsetup.ppp.serial1.mru: [ 128 to 1500 ] (default = 1500)
HDSsetup.ppp.serial1.allowpap: [ NO | YES ]
HDSsetup.ppp.serial1.local.name: DOMAIN_NAME
HDSsetup.ppp.serial1.local.password:
<encrypted value when BOOTP password given>
HDSsetup.ppp.serial2.messagelevel:
[ LOW | MEDIUM | HIGH ]
HDSsetup.ppp.serial2.headercomp: [ ENABLED | DISABLED ]
HDSsetup.ppp.serial2.protocomp: [ ENABLED | DISABLED ]
HDSsetup.ppp.serial2.linkmonitor: [ ENABLED | DISABLED ]
HDSsetup.ppp.serial2.linkmonitor.interval: [ 5 to 300 ] (default =
10)
HDSsetup.ppp.serial2.addressnegotiation: [ ENABLED | DISABLED ]
HDSsetup.ppp.serial2.mru: [ 128 to 1500 ] (default = 1500)
HDSsetup.ppp.serial2.allowpap: [ NO | YES ]
HDSsetup.ppp.serial2.local.name: DOMAIN_NAME
HDSsetup.ppp.serial2.local.password: <encrypted value when
BOOTP password given>
HDSsetup.port.serial1.usage: [ UNSPECIFIED | SLIP | CSLIP |
PPP | CONSOLE ]
HDSsetup.port.serial1.baud: [ 150 | 300 | 1200 |
2400 | 4800 | 9600 | 19200 | 38400 | 57600 ]
HDSsetup.port.serial1.parity: [ None | Even | Odd ]
HDSsetup.port.serial1.databits: [ 7 | 8 ]
HDSsetup.port.serial1.stopbits: [ 1 | 2 ]
HDSsetup.port.serial1.flow: [ None | XON/XOFF | SendXOFF | RecvXOFF
| CTS/RTS ]
HDSsetup.port.serial2.usage: [ UNSPECIFIED | SLIP | CSLIP |
PPP | CONSOLE ]
HDSsetup.port.serial2.baud: [ 150 | 300 | 1200 |
2400 | 4800 | 9600 | 19200 | 38400 | 57600]
HDSsetup.port.serial2.parity: [ None | Even | Odd ]
HDSsetup.port.serial2.databits: [ 7 | 8 ]
HDSsetup.port.serial2.stopbits: [ 1 | 2 ]
HDSsetup.port.serial2.flow: [ None | XON/XOFF | SendXOFF | RecvXOFF
| CTS/RTS ]
HDSsetup.domain_server.primary: nnn.nnn.nnn.nnn
HDSsetup.domain_server.secondary: nnn.nnn.nnn.nnn
HDSsetup.xdmcp.access: [ OFF | Broadcast | Direct | Indirect |
Hosts ]
HDSsetup.xdmcp.action: [ Stop | Persist ]
HDSsetup.xdmcp.host: DOMAIN_NAME
HDSsetup.xdmcp.host.file:
HDSsetup.xdmcp.keepalive.minimum: [ 0 to 10000 ] (default = 1
minute)
HDSsetup.xdmcp.keepalive.timeout: [ 3 to 3600 ] (default = 20
seconds)
HDSsetup.xdmcp.chooser: [ YES | NO ]
HDSsetup.xdmcp.chooser.AllowDirect: [ NO | YES ]
HDSsetup.xdmcp.default.AccessControl: [ ENABLED | DISABLED ]
HDSsetup.xdmcp.server_reset: [ YES | NO ]
HDSsetup.password.is_global: [ NO | YES ]
HDSsetup.hide_icon: [ NO | YES ]
HDSsetup.telnet.primary.host: DOMAIN_NAME
HDSsetup.telnet.autostart: [ NO | YES ]
HDSsetup.Mwm.autostart: [ NO | YES ]
HDSsetup.Olwm.autostart: [ NO | YES ]
HDSsetup.console.autostart: [ NO | YES ]
HDSsetup.memory.autostart: [ NO | YES ]
HDSsetup.snmp.traps: [ NO | YES ]
HDSsetup.default.font.path:
HDSsetup.RGB.file:
HDSsetup.FXUtilities.address: DOMAIN_NAME
HDSsetup.FXUtilities.hosttype: [ UNIX | VMS ]
HDSsetup.FXUtilities.protocol: [ TFTP | FTP | NFS ]
HDSsetup.FXUtilities.username:
HDSsetup.FXUtilities.password:
<encrypted value when BOOTP password given>
HDSsetup.FXUtilities.account:
HDSsetup.FXUtilities.directory:
HDSsetup.host1.hostname:
HDSsetup.host1.address: DOMAIN_NAME
HDSsetup.host1.hosttype: [ UNIX | VMS ]
HDSsetup.host1.protocol: [ TFTP | FTP | NFS ]
HDSsetup.host1.username:
HDSsetup.host1.password: <encrypted value when BOOTP password
given>
HDSsetup.host1.account:
HDSsetup.host1.local.directory:
HDSsetup.host1.remote.directory:
HDSsetup.host2.hostname:
HDSsetup.host2.address: DOMAIN_NAME
HDSsetup.host2.hosttype: [ UNIX | VMS ]
HDSsetup.host2.protocol: [ TFTP | FTP | NFS ]
HDSsetup.host2.username:
HDSsetup.host2.password: <encrypted value when BOOTP password
given>
HDSsetup.host2.account:
HDSsetup.host2.local.directory:
HDSsetup.host2.remote.directory:
HDSsetup.host3.hostname:
HDSsetup.host3.address: DOMAIN_NAME
HDSsetup.host3.hosttype: [ UNIX | VMS ]
HDSsetup.host3.protocol: [ TFTP | FTP | NFS ]
HDSsetup.host3.username:
HDSsetup.host3.password: <encrypted value when BOOTP password
given>
HDSsetup.host3.account:
HDSsetup.host3.local.directory:
HDSsetup.host3.remote.directory:
HDSsetup.host4.hostname:
HDSsetup.host4.address: DOMAIN_NAME
HDSsetup.host4.hosttype: [ UNIX | VMS ]
HDSsetup.host4.protocol: [ TFTP | FTP | NFS ]
HDSsetup.host4.username:
HDSsetup.host4.password: <encrypted value when BOOTP password
given>
HDSsetup.host4.account:
HDSsetup.host4.local.directory:
HDSsetup.host4.remote.directory:
HDSsetup.host5.hostname:
HDSsetup.host5.address: DOMAIN_NAME
HDSsetup.host5.hosttype: [ UNIX | VMS ]
HDSsetup.host5.protocol: [ TFTP | FTP | NFS ]
HDSsetup.host5.username:
HDSsetup.host5.password: <encrypted value when BOOTP password
given>
HDSsetup.host5.account:
HDSsetup.host5.local.directory:
HDSsetup.host5.remote.directory:
HDSsetup.client.config.path:
HDSsetup.startup.command.file:
HDSsetup.server_reset.command.file:
HDSsetup.KeycodeTranslation.path:
HDSsetup.screen.width: nnnn (pixels value)
HDSsetup.screen.height: nnnn (pixels value)
HDSsetup.screen.depth: n (bits value)
HDSsetup.keyboard.kbtype: [ Default | Swiss-German |
Swiss-French | Swedish | French | Japanese | French-Canadian |
French-Canadian-compose ]
HDSsetup.keyboard.click: [ 0 | 25 | 50 | 100 ] (default = 25
percent)
HDSsetup.bell.volume: [ 0 | 25 | 50 | 100 ] (default = 50
percent)
HDSsetup.bell.pitch: [ 100 to 10000 ] (default = 600 Hz)
HDSsetup.bell.duration: [ 10 to 1000 ] (default = 100 mil lisecs)
HDSsetup.screensaver.timeout: [ 0 to 32767 ] (default = 300
secs)
HDSsetup.screensaver.interval: [ 0 to 300 ] (default = 30 secs)
HDSsetup.screensaver.method: [ Energy Star | Blanking | XLogo ]
HDSsetup.backingstore.enable: [ YES | NO ]
HDSsetup.backingstore.saveunder: [ YES | NO ]
HDSsetup.backingstore.default: [ NEVER | MAPPED ]
HDSsetup.default.file.protocol: [ TFTP | FTP | NFS ]
HDSsetup.PixelZeroWhite: [ NO | YES ]
HDSsetup.memwarn: nnn (Kbytes value; default = 300)
HDSsetup.server_reset: [ NO | YES ]
HDSsetup.keyboard_cursor_mode: [ DISABLED | ENABLED ]
HDSsetup.trailers: [ DISABLED | ENABLED ]
HDSsetup.SaveToNVM: [ NO | YES ]
HDSsetup.net_type: [Auto Sense | Ethernet | IEEE 802.3 ]
HDSsetup.NFS.block.size: [ 128 to 8192 ] (default = 8192
bytes)
HDSsetup.syslog.buffer.size: [ 8 to 64 ] (default = 12 kb)
HDSsetup.hostresolver.host: nnn.nnn.nnn.nnn
HDSsetup.hostresolver.file:
HDSsetup.font.cache.size: nnn (Kbytes value; default = 1024)
HDSsetup.timeserver.enable: [ YES | NO ]
HDSsetup.timeserver.host: DOMAIN_NAME
HDSsetup.default.AccessControl: [ DISABLED | ENABLED ]
HDSsetup.audio.in.device:
[ Unspecified | HDS ViewCam | HDS Headset | CallPort Spkr/Mic | HDS
Microphone | HDS Tuner | VCR | Line Level Audio ]
HDSsetup.audio.out.device: [ HDS Internal Speaker | External Speakers |
HDS Headset | CallPort Spkr/Mic ]
HDSsetup.audio.in.volume: [ 1 to 100 ]
HDSsetup.audio.out.volume: [ 0 to 100 ]
HDSsetup.internal.flow.timeout: [ 0 to 32767 ] (default = 60
secs)
Return to Section Heading Page
Return to the Home Page
If you need more information than is available here, you can reach
HDS via email at info@hds.com, or
call us at 1.800.HDS.1551 in the USA, or at +610.277.8300 from outside
the US. For questions or problems regarding the HDS WWW page, contact
webmaster@hds.com.
© 1996 by HDS Network Systems
Inc.