This page describes the ViewStation's Serial Port 1
Connector.
The serial port 1 connector is a six-pin
RS-423/RS-232 port using an unshielded female RJ11 connector with the
following configuration: (Pin 6 is on the right edge of the connector):
PIN -- SIGNAL
1 -- RTS
2 -- Transmit Data (output)
3 -- DTR
4 -- Ground
5 -- Receive Data (input)
6 -- CTS
Baud rates from 110 to 57.6 Kbaud are supported.
Return to Section Heading Page
Return to the Home Page
If you need more information than is available here, you can reach
HDS via email at info@hds.com, or
call us at 1.800.HDS.1551 in the USA, or at +610.277.8300 from outside
the US. For questions or problems regarding the HDS WWW page, contact
webmaster@hds.com.
© 1996 by HDS Network Systems
Inc.