This page describes the ViewStation's fdisk command.
Using
the fdisk Command
The fdisk command is a Console window command. It is password
protected.
You can use fdisk to format or erase ViewStation
FlashPROM and PC Card devices. It is available from any Console window,
either local on the ViewStation, or from a remote Console window from
another device.
From the Console window prompt (the fdisk command is password
protected), type: HDS> fdisk
The fdisk
command must be used for disks being programmed for the first time.
ViewStations equipped with ROM or hard disks from the factory do not
need to use the fdisk command (disks ordered from the factory are
already initialized and loaded with HDSware).
Return to Section Heading Page
Return to the Home Page
If you need more information than is available here, you can reach
HDS via email at info@hds.com, or
call us at 1.800.HDS.1551 in the USA, or at +610.277.8300 from outside
the US. For questions or problems regarding the HDS WWW page, contact
webmaster@hds.com.
© 1996 by HDS Network Systems
Inc.