16/4 ISA-16 Adapter Switch and Jumper Settings

Switch Block 1 - Cable Type - Switch 1
STP or UTP Switch #1
STP (D-shell, 9 Pin Connector) on
UTP (RJ-45 connector) off
Switch Block 2 - RPL Enable/Disable - Switch 2
RPL Remote Boot Prom Switch #2
Remote Boot Prom Enable on
Remote Boot Prom Disable off
Switch Block 2 - ROM Addresses - Switches 1-6
ROM Address Switch #
1 2 3 4 5 6
C0000 off on on on on on
C2000 off on on on on off
C4000 off on on on off on
C6000 off on on on off off
C8000 off on on off on on
CA000 off on on off on off
CC000 off on on off off on
CE000 off on on off off off
D0000 off on off on on on
D2000 off on off on on off
D4000 off on off on off on
D6000 off on off on off off
D8000 off on off off on on
DA000 off on off off on off
DC000 off on off off off on
DE000 off on off off off off
Switch Block 2 - Interrupt Levels - Switches 7-8
Interrupt Level Switch #
7 8
2 on on
3 on off
6 off on
7 off off
Switch Block 2 - Primary or Alternate - Switch 9
Primary or Alternate Switch #
9
Primary off
Alternate on
Switch Block 2 - Shared RAM Size - Switches 10-11
Shared RAM Size Switch #
10 11
8KB on on
16KB off on
32KB on off
64KB off off
Switch Block 2 - Adapter Data Rate - Switch 12
16Mbps or 4Mbps Switch #
12
16Mbps off
4Mbps on

 

Jumper Setting for 8 or 8/16 Mode
Jumper Position Mode Setting
1-2 8-bit
2-3 6-bit

Back to the PowerPC NT Page